1967-72 C-10 TRUCK KICK PANELS
1967–1972 Chevrolet C-10 — Hand-Laid Fiberglass Kick Panels — 6.5" Speaker Fitment — Hand-Built in Phoenix, Arizona
In Stock & Shipping Now. Built, inspected, packaged, and shipped from our Phoenix shop.
The Fesler USA 1967–1972 C-10 fiberglass kick panels are hand-laid in Phoenix and built to drop in alongside the Fesler C-10 door panels for a seamless, factory-fitted interior. Designed around a 6.5" speaker opening, with a flat version available that requires zero cutting to install. Raw gel-coat finish ships ready for your upholstery shop or paint booth. About an hour to trim and test-fit. Relatively straightforward install. The kind of detail work that separates a finished build from a half-finished one.
HAND-LAID IN PHOENIX. INSPECTED, FINISHED, PACKAGED, AND SHIPPED IN-HOUSE.
THIS IS NOT AN IMPORT PART.
Why builders choose Fesler C-10 kick panels
- Hand-laid fiberglass construction: Every panel is built, inspected, and finished in our Phoenix shop. Not injection-molded. Not sourced overseas.
- Designed to pair with Fesler door panels: Drop-in fitment alongside Fesler C-10 door panels (sold separately) for a cohesive, matched interior from door to kick.
- Two speaker options: The standard panel is designed for a 6.5" speaker with minimal cutting. The flat version requires zero cutting for a clean, no-fuss install.
- Modifiable for other speaker sizes: The panel can be modified to accommodate just about any speaker size. Your build, your audio setup.
- Paint and upholstery ready: Smooth gel-coat finish gives your shop a clean surface to work with. No prep guesswork.
- Everything ships in-house: No third-party fulfillment. Your panels are inspected and packaged by the same team that built them.
What's included
- Two (2) hand-laid fiberglass kick panels, smooth gel-coat finish (driver and passenger)
- Standard version: designed for 6.5" speaker with minimal cutting
- Flat version: zero cutting required — select your preference at checkout
Not included: Speakers, upholstery, paint finish, or door panels (sold separately).
Important: These panels are not sold painted or upholstered.
It is the customer's responsibility to fit, paint, or upholster these panels to match your interior. Professional installation is recommended.
Fitment
- Primary application: 1967, 1968, 1969, 1970, 1971, and 1972 Chevrolet C-10 pickup.
- Pairs with: Fesler 1967–1972 C-10 door panels (sold separately) for a complete, matched lower interior.
- Body note: Designed for factory OE shells. Test-fit before committing to upholstery or paint.
Speaker fitment
Two versions are available. Choose based on your audio setup and how much fabrication work you want to do.
Running a different speaker size? Both versions can be modified to fit just about any speaker. The panel material works cleanly with standard cutting tools. Plan your speaker selection before sending panels to your upholstery shop.
Installation
- Install time: Approximately one hour to trim, test-fit, and install.
- Skill level: Beginner to intermediate. Relatively straightforward install. No major fabrication required on a standard application.
- Tools required: Basic hand tools. Cutting tools if modifying the speaker opening beyond the designed cutout.
- Pairs with: Fesler C-10 door panels for a fully matched lower interior. Install door panels and kick panels together for the cleanest result.
- Professional installation recommended, particularly for upholstery fitment and speaker wiring.
Shipping
- Inspected, finished, packaged, and shipped in-house from Phoenix, Arizona.
- Fiberglass panels are packaged to withstand freight without damage.
- Lead time may apply. Contact us before ordering if your build has a hard deadline.
Frequently asked questions
What years do these kick panels fit?
These panels fit the 1967, 1968, 1969, 1970, 1971, and 1972 Chevrolet C-10 pickup. They are designed for factory OE shells. Test-fit before sending to your upholstery shop.
What is the difference between the standard and flat versions?
The standard version is designed for a 6.5" speaker and requires minimal cutting. The flat version requires zero cutting for speaker installation and offers the cleanest, fastest install path. Both can be modified to accommodate other speaker sizes.
Can I run a speaker size other than 6.5"?
Yes. Both versions can be modified to fit just about any speaker size. The fiberglass material cuts cleanly with standard tools. Plan your speaker selection before finalizing upholstery or paint work so your shop can account for the opening.
Do these panels work with the Fesler C-10 door panels?
Yes. These kick panels are designed to pair directly with the Fesler 1967–1972 C-10 door panels (sold separately). Installing both together gives you a cohesive, matched lower interior from door to kick panel. It is the intended application.
Do the panels come painted or upholstered?
No. Panels ship raw in gel-coat finish, ready for upholstery or paint. It is the customer's responsibility to have the panels finished to match their interior. Professional installation is recommended.
How long does installation take?
Plan for approximately one hour to trim, test-fit, and install both panels. The install is relatively straightforward on a factory shell. Basic hand tools are all that is required for a standard application.
Complete the Fesler C-10 interior.
Kick panels. Door panels. Dash overlay. A-pillar panels. Dakota Digital gauges. Every piece designed together, built in Phoenix. Browse all Fesler C-10 interior parts.
Questions about speaker fitment, door panel pairing, or building a complete C-10 interior? Contact Fesler USA. We will help you plan it right.
Keywords: 1967 1968 1969 1970 1971 1972 C-10 fiberglass kick panels, 67-72 C10 kick panels with speaker, Chevrolet C10 interior panels, hand-built fiberglass kick panels Phoenix Arizona, Fesler USA C-10 interior, C10 6.5 speaker kick panels, American-made C10 interior parts, classic Chevy truck kick panels, 67-72 C10 door panels and kick panels, Chevy truck interior upgrade fiberglass.
Description
1967–1972 Chevrolet C-10 — Hand-Laid Fiberglass Kick Panels — 6.5" Speaker Fitment — Hand-Built in Phoenix, Arizona
In Stock & Shipping Now. Built, inspected, packaged, and shipped from our Phoenix shop.
The Fesler USA 1967–1972 C-10 fiberglass kick panels are hand-laid in Phoenix and built to drop in alongside the Fesler C-10 door panels for a seamless, factory-fitted interior. Designed around a 6.5" speaker opening, with a flat version available that requires zero cutting to install. Raw gel-coat finish ships ready for your upholstery shop or paint booth. About an hour to trim and test-fit. Relatively straightforward install. The kind of detail work that separates a finished build from a half-finished one.
HAND-LAID IN PHOENIX. INSPECTED, FINISHED, PACKAGED, AND SHIPPED IN-HOUSE.
THIS IS NOT AN IMPORT PART.
Why builders choose Fesler C-10 kick panels
- Hand-laid fiberglass construction: Every panel is built, inspected, and finished in our Phoenix shop. Not injection-molded. Not sourced overseas.
- Designed to pair with Fesler door panels: Drop-in fitment alongside Fesler C-10 door panels (sold separately) for a cohesive, matched interior from door to kick.
- Two speaker options: The standard panel is designed for a 6.5" speaker with minimal cutting. The flat version requires zero cutting for a clean, no-fuss install.
- Modifiable for other speaker sizes: The panel can be modified to accommodate just about any speaker size. Your build, your audio setup.
- Paint and upholstery ready: Smooth gel-coat finish gives your shop a clean surface to work with. No prep guesswork.
- Everything ships in-house: No third-party fulfillment. Your panels are inspected and packaged by the same team that built them.
What's included
- Two (2) hand-laid fiberglass kick panels, smooth gel-coat finish (driver and passenger)
- Standard version: designed for 6.5" speaker with minimal cutting
- Flat version: zero cutting required — select your preference at checkout
Not included: Speakers, upholstery, paint finish, or door panels (sold separately).
Important: These panels are not sold painted or upholstered.
It is the customer's responsibility to fit, paint, or upholster these panels to match your interior. Professional installation is recommended.
Fitment
- Primary application: 1967, 1968, 1969, 1970, 1971, and 1972 Chevrolet C-10 pickup.
- Pairs with: Fesler 1967–1972 C-10 door panels (sold separately) for a complete, matched lower interior.
- Body note: Designed for factory OE shells. Test-fit before committing to upholstery or paint.
Speaker fitment
Two versions are available. Choose based on your audio setup and how much fabrication work you want to do.
Running a different speaker size? Both versions can be modified to fit just about any speaker. The panel material works cleanly with standard cutting tools. Plan your speaker selection before sending panels to your upholstery shop.
Installation
- Install time: Approximately one hour to trim, test-fit, and install.
- Skill level: Beginner to intermediate. Relatively straightforward install. No major fabrication required on a standard application.
- Tools required: Basic hand tools. Cutting tools if modifying the speaker opening beyond the designed cutout.
- Pairs with: Fesler C-10 door panels for a fully matched lower interior. Install door panels and kick panels together for the cleanest result.
- Professional installation recommended, particularly for upholstery fitment and speaker wiring.
Shipping
- Inspected, finished, packaged, and shipped in-house from Phoenix, Arizona.
- Fiberglass panels are packaged to withstand freight without damage.
- Lead time may apply. Contact us before ordering if your build has a hard deadline.
Frequently asked questions
What years do these kick panels fit?
These panels fit the 1967, 1968, 1969, 1970, 1971, and 1972 Chevrolet C-10 pickup. They are designed for factory OE shells. Test-fit before sending to your upholstery shop.
What is the difference between the standard and flat versions?
The standard version is designed for a 6.5" speaker and requires minimal cutting. The flat version requires zero cutting for speaker installation and offers the cleanest, fastest install path. Both can be modified to accommodate other speaker sizes.
Can I run a speaker size other than 6.5"?
Yes. Both versions can be modified to fit just about any speaker size. The fiberglass material cuts cleanly with standard tools. Plan your speaker selection before finalizing upholstery or paint work so your shop can account for the opening.
Do these panels work with the Fesler C-10 door panels?
Yes. These kick panels are designed to pair directly with the Fesler 1967–1972 C-10 door panels (sold separately). Installing both together gives you a cohesive, matched lower interior from door to kick panel. It is the intended application.
Do the panels come painted or upholstered?
No. Panels ship raw in gel-coat finish, ready for upholstery or paint. It is the customer's responsibility to have the panels finished to match their interior. Professional installation is recommended.
How long does installation take?
Plan for approximately one hour to trim, test-fit, and install both panels. The install is relatively straightforward on a factory shell. Basic hand tools are all that is required for a standard application.
Complete the Fesler C-10 interior.
Kick panels. Door panels. Dash overlay. A-pillar panels. Dakota Digital gauges. Every piece designed together, built in Phoenix. Browse all Fesler C-10 interior parts.
Questions about speaker fitment, door panel pairing, or building a complete C-10 interior? Contact Fesler USA. We will help you plan it right.
Keywords: 1967 1968 1969 1970 1971 1972 C-10 fiberglass kick panels, 67-72 C10 kick panels with speaker, Chevrolet C10 interior panels, hand-built fiberglass kick panels Phoenix Arizona, Fesler USA C-10 interior, C10 6.5 speaker kick panels, American-made C10 interior parts, classic Chevy truck kick panels, 67-72 C10 door panels and kick panels, Chevy truck interior upgrade fiberglass.
